Hot Tub Filters

Your hot tub filter is one of its most important components, providing a means of removing suspended particles, grease and debris from the water. Your filter needs cleaning regularly to ensure that it works efficiently.

How to clean your hot tub filters

Ideally, filters should be replaced every 12 months but, if you are able let your filters dry between uses they will last longer. For this reason it is sensible to keep two sets of filters and alternate their use with each clean.

High temperatures and a wet environment can make an unprotected filter surface a target for the growth of bacteria. We offer a range of filter cartridges where the surfaces are coated with microban® antimicrobial protection to inhibit the growth of bacteria and reduce staining, odours and degradation of the filter surfaces.

Microban® hot tub filters are easier to clean and also stay fresher between cleanings.

How to Identify and Buy the Correct Hot Tub Filters

If you know the make of your hot tub select it from this list and then select the most likely option from the choice of filters available for your make of tub.
If you can find a reference number on your filter look for it in this list.
If you know the size and the end cap configuration of your filter then have a look at our hot tub filters reference tableand try to locate the correct one. But have a look at how to measure your hot tub filter first, because the measurements are not always exactly what they seem.
Finally, if all else fails contact us and we'll do our best to identify the correct filter for you. If we don't hold it in stock we will probably be able to get it for you in a few days.

Blaster Automatic Filter Cleaner

Blaster 1000 Automatic Filter Cleaner The Blaster Automatic Filter Cleaner prolongs filter life. the Blaster automatically rotates cartridge filters whilst a series of powerful jets direct water to clean between the filter pleats.

The Blaster cleans the filter horizontally allowing the dirt and debris to easily fall from the filter and avoid the risk of it sticking as with vertical or upright cleaning.

To use, simply connect the Blaster to a hose using the hozelock connector (supplied) and rest the spa filter in the Blaster cradle. It takes just a few minutes to clean most filters.

Blaster 1000 for filters up to 20 inches /508mm

Blaster 2000 for filters up to 27 inches/686mm

read the Blaster Instruction Manual

NB. we recommend that you continue to use a proprietary filter cleaning product periodically to ensure that all traces of grease and limescale are removed.

Pure 'n Clean

This is a professional grade, fast action cartridge filter cleaner to remove dirt, oils and scale. It is produced by Filbur Manufacturing - the supplier of most of our high grade filter cartridges. Pure 'n Clean melts away calcium, minerals, dirt and oils and works at least as effectively as our powder filter cleaners. The deep penetrating action renews cartridge filter efficiency and flow rate.

Just spray well into the filter pleats, leave for 10 minutes and rinse thoroughly.

Recommended for use with a Water Wand or the Blaster Automatic Filter Cleaner.

Also cleans patio furniture, pool equipment, acrylic spas, boats and more!

32 fl oz / 946 ml

08454 300 030
(Local rate)

Site Map

Cheap Hot Tubs !!