Hot Tub Cover Lifters Side Mount

HOT TUB COVER LIFTERS - SIDE MOUNT

View our Spa Cover Lifter Comparison Table

View under-mount cover lifters that avoid the need to drill into the side of your spa

Cover Valet Cover Genie

hot tub cover lifters - cover genie cover lifter This very economical cover lifter from Cover Valet in the USA will attach to either a wooden or plastic sided spa.

The Cover Genie is an innovatively designed, low-profile lifter that will fit most spa covers. Only about 12" of clearance behind the spa is needed. This cover lifter is well constructed of the highest quality materials and powder coated.

Requires only approximately 3" (760mm) of side clearance.

Cover Genie installation instructions

COVER LIFTER SALE

Cover Valet Slide-It

This unique sliding action lifter from Cover Valet provide effortless cover removal.

This spa cover lifter works by simply sliding and then dropping the spa cover conveniently to the back side of the spa.

Just 10-12" clearance is needed behind the spa.

The Cover Slide-It is constructed from zinc plated, black, powder-coated steel and is built to withstand harsh environments. Two heavy duty zinc plated steel brackets are attached to the spa cabinet.

Cover Valet Slide-It Installation Instructions

Was £139.95

now only £

EASYLIFT 1

This cover lifter is British made from 100% light weight aluminium so it won't rust. They feature 3mm wall thickness tubing which gives a strong, rigid construction. [Check out any cheaper brands carefully because they're very likely to be only 1.5mm wall thickness, providing poor rigidity and little protection from bending in strong winds or when using with larger spa covers.]

Nylon powder coated for extra toughness and supplied with high tensile bolts to fix to your spa. Complete with comprehensive fixing instructions and appropriate size drill bit. All you have to do is supply the tools!

splash spas hot tub cover lifter closed The cover does not touch the floor during operation of the lifter.

Fits any square or oblong hot tub up to 8 ft (2.45 m) wide. splash spas hot tub cover lifter

EasyLift 1 Installation Instructions

Rear clearance required: thickness of the folded cover approximately 18” (440mm).

Side clearance required: 4" (100mm)

NB: this cover lifter is also available with a slip under the spa mount system to avoid drilling into the spa skirt.

Was £147.99

now only £

The Original Cover Valet

cover valet cover lifter The Cover Valet is the worlds best premium cover lifter.

This low profile spa hydraulic cover lift works where others can't! The Cover Valet lifts and stores covers on spas set inside gazebos, those sunken in a deck or in any tight space. Its versatility allows for use with a wide range of spa installations, and it is particularly handy when space is limited. Just 6-8" clearance is needed behind the spa and the Cover Valet fits any width spa cover.

Dual gas springs assist in effortlessly lifting and lowering the cover.

A locking feature holds the cover open until you are ready to close it.

The Cover Valet is constructed from zinc and powder coated stainless steel and is built to to stand up to harsh environments. Two heavy duty zinc coated metal frames are attached to your spa cabinet or the decking next to your in ground spa.

The Cover Valet makes it possible for absolutely anybody to lift a heavy spa cover.

The Cover Valet has a one year warranty and the pneumatic pistons are replaceable, should that ever be required.

Cover Valet installation instructions

cover valet cover lifter operation

Spa Covers up to 90" / 2.29m

Was £170.95

now only £

Spa Covers over 90"/ 2.29m

Was £180.95

now only £

Cover Valet Cover Caddy

The Cover Caddy from Cover Valet in the USA gives you a hand with your spa cover with just three simple steps:

1) Raise and open support arms.

2) Fold the spa cover in half and slide onto support arms.

3) Push the spa cover downward into a stored position.

Gas spring hydraulic assistance allows the cover to be easily pushed down and replaced. The Cover Caddy™ comes fully assembled in the box for ease of installation.

The Cover Caddy has a one year warranty and the pistons are replaceable, should that ever be required.

Cover Caddy Installation Instructions

Was £170.99

now only £

Leisure Concepts CoverMate FreeStyle

Covermate freestyle hot tub cover lifter This cover lift is designed specifically for round and octagonal spas, but will also fit square or oblong hot tubs up to 8 ft (2.44 m). It is pneumatically assisted and is and when in the open position, the CoverMate Freestyle positions the cover well away from the hot tub so that your use is not restricted in any way.

The adjustable mounting base system simply slides under the hot tub and enables the CoverMate FreeStyle to be installed on virtually any hot tub. The spa's weight provides a massive amount of strength to support the bracket system.

Was £189.95

now only £

CoverMate Freestyle assembly instructions

Rear clearance required: 12" Side clearance required: None

Cover Valet Cover Rock-It Side-Mount

The Cover Rock-It is well constructed of the highest quality materials and powder coated aluminium. It installs easily in minutes and is an very affordable solution from Cover Valet in the USA. This cover lifter attaches to the skirt of your spa and stores the cover at ground level.

The Cover Rock-It Side Mount fits most spas up to 96" (2.4m) wide, but we recommend it's use for smaller (under 1.5m width) spas.

Requires only approximately 3" (760mm) of side clearance.

Cover Rock-It Installation Instructions

Leisure Concepts CoverMate Easy

A basic 'frame' type lifter that stows the cover to one side and low against the spa. It is held in place by 2 brackets, at floor level, at the back of the spa. When opened, the cover is then held in place with 2 nylon, UV-resistant retaining straps fixed at each spa side.

Now supplied with the TowelMate accessory for hanging up to three towels right where they're needed most.

Made of black powder-coated aluminium with screw caps, and rubber grips.

Made of larger size aluminium tubing to virtually eliminate twisting and torquing and is therefore recommended for medium to large size spas (over 1.5m width) spas.

CoverMate Easy Installation Instructions

Leisure Concepts CoverMate I

The No 1 cover lifter in the industry.

Made from aluminium with composite brackets for complete corrosion free operation.

This is a side mounted lifter to stow the cover to one side and above the spa. It is now supplied with the TowelMate accessory for hanging up to three towels right where they're needed most.

CoverMate I Installation Instructions

Leisure Concepts CoverMate II - Side Mount

The CoverMate II is a good choice of cover lift when clearance behind the spa is not important (18"/46cm clearance is needed). The cover is stored low down but off the ground.

Made of black powder-coated aluminium with screw caps, bolt covers and rubber grips to ensure years of trouble-free performance.

Fits most spas up to 96" (2.4m) wide.

CoverMate II Installation Instructions

NB: this cover lifter is also available with a slip under the spa mount system to avoid drilling into the spa skirt.

Leisure Concepts CoverMate III

The hydraulic CoverMate III is an excellent choice when clearance behind the spa is tight (only 6"/15cm clearance is needed). The cover is stored upright at spa level and the break-proof locking system prevents inadvertent closing of the cover and eliminates broken shock problems.

Made of black powder-coated aluminium with screw caps, bolt covers and rubber grips to ensure years of trouble-free performance.

Fits most spas up to 96" (2.4m) wide.

CoverMate III Installation Instructions

Spa Cover Lifters